DVM processes testplan columns from left to right, for example, the BodePlot test:

*?@ objective source load label loadcomponentvalues
BodePlot(OUTPUT:1) SOURCE(INPUT:1, Nominal) LOAD(OUTPUT:1, 100%) BodePlot lcv/bode_mag_to_grid.txt

BodePlot(OUTPUT:1)

  1. Resets Circuit to Steady-State
    1. Configures Input Sources to DC Sources, Loads to Resistive Loads
    2. Resets All Probe Configuration Properties to Empty Strings!
  2. Sets Load Subcircuit Type to Bode Load