baseschematic: ..\..\..\..\..\..\..\..\DVM_PFC_Continuous_Conduction_Mode.sxsch
log_file: ..\..\..\..\..\..\dvm_advanced.log
simulator: simplis
screenshot: schematic.png
deck: input.deck
init: input.deck.init
test_argument: Transient|FindACSteadyState|HL_Maximum|F_Low|Enabled|100% Load
datetimestamp: 12/10/2015 6:21 PM
status: RUN
feature: DVM PFCOutput#tran
spec: Max_VPFCOutput=pass,Max. Output1 Voltage (404.877) is less than or equal to Max. Output1 Voltage Spec (420)
scalar: Frequency(Line)=50
scalar: RMS(VLine)=265
scalar: VPFCOutput %_diff_last_2_linecycles=0.0000000792304%
spec: AC_Settling(PFCOutput)=pass, Voltage across PFCOutput has settled to (792.304p) % and is less than or equal to Max Settling Spec of (10m) %
scalar: Avg(VPFCOutput Last LineCycle)=400.097
scalar: Avg(VPFCOutput Previous LineCycle)=400.097
scalar: VPFCOutput %_diff_last_2_linecycles=0.0000000792304%
scalar: Avg(VPFCOutput At Simulation Start Time)=400.097
stats: N/A
numgraphs: 3
graphid: 21
graphname: AC#tran
sg: simplis_tran2_21
path: simplis_tran2_21.sxgph
scalar: Max(VPFCOutput)=404.877
scalar: Min(VPFCOutput)=395.275
scalar: Min(IPFCOutput)=494.094m
scalar: Max(IPFCOutput)=506.096m
graphid: 27
graphname: DVM PFCOutput#tran
sg: simplis_tran2_27
path: simplis_tran2_27.sxgph
curve31:VPFCOutput,FF0000
curve37:IPFCOutput,008000
png: simplis_tran2_27.png
scalar: Max(VLine)=374.368
scalar: Min(VLine)=-374.368
scalar: Max(ILine)=1.1732
scalar: Min(ILine)=-1.1732
graphid: 32
graphname: DVM Line#tran
sg: simplis_tran2_32
path: simplis_tran2_32.sxgph
curve36:VLine,FF0000
curve39:ILine,008000
png: simplis_tran2_32.png
rstatus: PASS